Milwaukee replacement electrode SE600 for MW802

Milwaukee Replacement Electrode SE600 for MW802 Product Description: The SE600 probe is specifically designed for use with the Milwaukee MW801 and MW802 PRO 3-in-1 pH, EC, and TDS combination meters. This probe allows you to easily and accurately measure pH, conductivity, and total dissolved solids (TDS). The probe features a dual connection to minimize the risk of clogging. It is gel-filled, eliminating the need to check the electrolyte level. The probe's resin housing is highly durable, chemical-resistant, and protects against accidental damage. Technical Specifications: Housing: Polypropylene Reference: Single, Ag/AgCl Junction: Cloth Electrolyte: Gel pH Range: 0 - 13 pH Temperature Range: 20 - 40 °C (68 - 104 °F) Tip Shape: Spherical Max. Pressure: 0.1 bar Length: 3.8 inches Cable Length: 7-pin / 1 m long Connector: DIN Care and Use: The SE600 Combo Electrode contains both a pH and an EC electrode, both of which require regular maintenance. pH sensors have a limited lifespan, and response time can slow over time. Proper care will ensure faster, more accurate results for longer. EC sensors are more robust but can still be affected by residue. The probe cap should always be stored with buffer or storage solution, not water. Clean your tester regularly by immersing it in cleaning solution. After cleaning and/or storage, calibrate the instrument before testing to compensate for any changes in the pH and EC sensor. Gently stir the PRO-Tester in the sample for faster results. Rinse the device with water after each test.